Filter
Top Products
15
QUICK OPERATION
14
1. Insert battery
Open the battery-chamber
door using the eyepiece cap.
Insert the batteries into the
chamber, then snap the
battery-chamber door shut.
2. Attach lens
Align the red mounting dot on
the lens with the one on the
camera. Gently insert the lens
into the mount and turn it
clockwise until it clicks into the
locked position.
3. Insert film
Press the film-chamber
release. Insert the film
cassette. Close the film-
chamber door.
4. Turn on power
Press the main switch to turn
the camera on.
5. Set Full Auto Operation
Press the program-reset button
to set the camera to fully-
automatic operation.
6. Select print format
Turn the format-selector switch
to the desired format before
taking the picture.
7. Focus on the subject
Align the subject within the
focus frame , then press
the shutter-release button
partway down.
The focus lamp will light when
the subject is in focus. The
flash will pop-up and fire when
necessary.
8. Take the picture
Gently press the shutter-
release button all the way
down to take the picture.
2102 OM E 16/10/97 11:27 AM Page 14