Nikon 1532 Digital Camera User Manual


 
333Technical Notes
Shooting (P, S, A, M)
Shutter-release disabled:
Non-CPU lens is attached: rotate camera mode dial to M (0 292).
Mode dial rotated to S after shutter speed of “Bulb” or “Time” selected
in mode M: choose new shutter speed (0 104).
Full range of shutter speeds not available:
Flash in use (0 93).
When On is selected for Movie settings > Manual movie settings in
the shooting menu, the range of available shutter speed varies with the
frame rate (0 159).
Can not select desired aperture: Range of available apertures varies with lens
used.
Colors are unnatural:
Adjust white balance to match light source (0 124).
Adjust Set Picture Control settings (0 135).
Can not measure white balance: Subject is too dark or too bright (0 131).
Image can not be selected as source for preset white balance
: Image was not
created with D3300 (
0
133).
Effects of Picture Control differ from image to image: A (auto) is selected for
sharpening, contrast, or saturation.
For consistent results over a series of
photos, choose another setting (0 140).
Metering can not be changed: Autoexposure lock is in effect (0 116).
Exposure compensation can not be used: Choose mode P, S, or A (0 100, 119).
Noise (reddish areas or other artifacts) appears in long time-exposures: Turn noise
reduction on (0 226).