Filter
Top Products
121
n
This section lists the error messages that appear in the display.
Error Messages
Message Solution
(Shutter-speed or
aperture display
flashes)
If the subject is too bright, lower ISO sensitivity
or choose a faster shutter speed or smaller aper-
ture (higher f-number).
If the subject is too dark, raise ISO sensitivity, use
the flash, or choose a slower shutter speed or
larger aperture (lower f-number).
Keeping the zoom ring
button pressed, rotate
the zoom ring to
extend the lens.
A lens with a retractable lens barrel button is
attached with the lens barrel retracted. Keeping
the retractable lens barrel button pressed, rotate
the zoom ring to extend the lens.
Check lens. Pictures
can only be taken
when a lens is
attached.
Attach a lens.
The clock has been
reset.
Set the camera clock.
No memory card.
Turn the camera off and confirm that the card is
correctly inserted.
This memory card is
not formatted. Format
the memory card?
Select Ye s to format the card, or turn the camera
off and insert another memory card.
Memory card is locked
(write protected).
Turn the camera off and slide the card write-pro-
tect switch to the “write” position.
Memory card is full.
• You may be able to record additional images if
you reduce image quality or size.
• Delete unwanted images.
• Insert another memory card.