Filter
Top Products
133
Setup Menu
Basic Camera Setup
Auto Off
If no operations are performed for a specified amount of time, the monitor turns
off and the camera enters standby mode (A 17).
Choose the time allowed to elapse before the camera enters standby mode from
30 s, 1 min (default setting), 5 min, and 30 min.
d button M z (Setup menu) (A121) M Auto off
C When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp blinks.
• If no operations are performed for another three minutes, the camera will turn off automatically.
• When the power-on lamp is blinking, pressing any of the following buttons will turn the monitor
back on.
➝ Power switch, shutter-release button, A button, c button, or b (movie-record) button
C Note on Auto Off
T
he time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• When a menu is displayed: If auto off is set to 30 s or 1 min, it is extended to three minutes.
• During slide show playback: up to 30 minutes
• When the AC adapter EH-62D is connected: 30 minutes