Filter
Top Products
E55
Reference Section
Auto Off
If no operations are performed for a specified amount of time, the monitor turns off and the
camera enters standby mode to save power (A 19).
This setting determines the amount of time that passes before the camera enters standby
mode.
d button M z menu icon M Auto off M k button
Option Description
Auto off You can select 30 s (default setting), 1 min, 5 min, or 30 min.
Sleep mode
If On (default setting) is selected, the camera enters standby mode when there is
no change in the brightness of the subject, even before the time selected in the
auto off menu has elapsed. The camera enters sleep mode after 30 seconds when
Auto off is set to 1 min or less, or after one minute when Auto off is set to 5 min
or more.
C When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp flashes.
• If no operations are performed for approx. another three minutes, the camera turns off
automatically.
• When the power-on lamp is flashing, pressing any of the following buttons turns the monitor back
on:
➝ Power switch, shutter-release button, A button, c button, or b (e movie-record) button
C The Auto Off Setting
• The time that passes before the camera enters standby mode is fixed in the following situations:
- When a menu is displayed: Three minutes (when auto off is set to 30 s or 1 min)
- During slide show playback: Up to 30 minutes
- When the audio/video cable is connected: 30 minutes
• The camera does not enter standby mode while the Eye-Fi card is uploading images.