Filter
Top Products
F9
Technical Notes and Index
Monitor content is hard to
see.
• Adjust monitor brightness.
• Monitor is dirty. Clean monitor.
96, E63
F6
Date and time of recording
are not correct.
• If camera clock has not been set, O flashes when
shooting images and recording movies. Images
and movies saved before clock is set are dated “00/
00/0000 00:00” or “01/01/2013 00:00” respectively.
Set the correct time and date using Time zone
and date in the setup menu.
• Check camera clock regularly against more
accurate timepieces and reset as required.
18, 96,
E60
No indicators displayed in
monitor.
Hide info is selected for Photo info.
Select Show info.
96, E63
Print date not available.
Time zone and date in the setup menu has not
been set.
18, 96,
E60
Date not imprinted on
images even when Print
date is enabled.
• The current shooting mode is one that does not
support Print date.
• The date cannot be imprinted on movies.
96, E65
Screen for setting time zone
and date is displayed when
camera is turned on.
Clock battery is exhausted; all settings were restored
to their default values.
18, 21
Camera settings reset.
Camera becomes hot.
The camera may become hot when recording movies
or uploading images from an Eye-Fi card for an
extended period of time, or when the camera is used
in a hot area; this is not a malfunction.
–
Problem Cause/Solution A