Filter
Top Products
F13
Troubleshooting
Technical Notes and Index
Playback Issues
Problem Cause/Solution
A
File cannot be
played back.
• File was overwritten or renamed by computer or another
make or model of camera.
•
File cannot be played back during interval timer shooting.
• Movies recorded with cameras other than COOLPIX P510
cannot be played back.
–
61
96
Cannot play a
sequence.
• Pictures shot continuously with cameras other than COOLPIX
P510 cannot be played as a sequence.
• Check the Sequence display options setting.
–
89, E63
Cannot zoom in on
picture.
•
Playback zoom cannot be used with movies, small pictures, or
cropped copies of size 320 × 240 pixels or smaller.
• Playback zoom may not be available for pictures taken with
cameras other than COOLPIX P510.
• 3D pictures cannot be enlarged when the camera is
connected via HDMI and they are played back in 3D.
–
–
E8
Cannot record or
play back voice
memo.
• Voice memos cannot be attached to movies.
• Voice memos cannot be attached to pictures taken with
cameras other than COOLPIX P510, and voice memos
recorded by other cameras cannot be played back.
100
88
Pictures and
movies cannot be
edited.
• Confirm the conditions that are required for editing pictures or
movies.
• Pictures and movies taken with cameras other than COOLPIX
P510 cannot be edited.
E16
E31
–
Pictures are not
displayed on
television.
•Video mode or HDMI is not correctly set in the TV settings
setup menu.
• Cables are connected to both the HDMI mini connector and
USB/audio video connector.
• Memory card contains no pictures. Replace memory card.
Remove memory card to play back pictures from internal
memory.
110,
E86
90
22
Nikon Transfer 2
does not start
when camera is
connected to a
computer.
• Camera is off.
• Battery is exhausted.
• USB cable is not correctly connected.
• Camera is not recognized by the computer.
• Confirm that the operating system used is compatible with
the camera.
•
Computer is not set to launch Nikon Transfer 2 automatically.
For more information on Nikon Transfer 2, refer to help
information contained in ViewNX 2.
25
24
90
–
91
94
The PictBridge
startup screen is
not displayed
when the camera
is connected to a
printer.
With some PictBridge-compatible printers, the PictBridge startup
screen may not be displayed and it may be impossible to print
images when Auto is selected for the Charge by computer
option. Set the Charge by computer option to Off and
reconnect the camera to the printer.
110,
E88