Filter
Top Products
103
General Camera Setup
General Camera Setup
The Setup Menu
From the menu screen, select the z tab to display the
setup menu, and then you can change the following
settings.
Press the d button M z (setup) tab (A11)
Option Description A
Welcome screen
Set whether or not the welcome screen is displayed
when power is turned on. The welcome screen image
can be selected.
The default setting is None.
E64
Time zone and date
Set settings related to the camera’s date and time. The
Time zone setting allows you to specify the time zone
where the camera is mainly used and whether or not
daylight saving time is in effect. When the x travel
destination is set, the camera automatically calculates
the time difference between the travel destination and
the w home time zone, and saves images using the
date and time of the travel destination.
E65
Monitor settings
Set the image display after shooting, the screen
brightness, and whether or not to display a framing grid or
histograms on the monitor.
E67
Print date
Imprint the shooting date and time on pictures at the
time of shooting. The default setting is Off.
Dates cannot be imprinted in the following situations.
- When the scene mode is set to Easy panorama,
Panorama assist or 3D photography
-When Pre-shooting cache, Continuous H: 120
fps or Continuous H: 60 fps is selected for
Continuous (A68)
- During movie recording
E68
AF assist
Motion detection
Vibration reduction
Print date
Monitor settings
Time zone and date
Welcome screen
Set up