Nikon COOLPIXP520BLK Digital Camera User Manual


 
E44
Shooting Menu (
j
,
k
,
l
or
m
Mode)
Reference Section
B Notes on Subject Tracking
The digital zoom is not available.
Set the zoom position, flash mode, focus mode, or menu settings before registering a subject. If
any of these are changed after a subject is registered, the subject will be canceled.
During certain conditions, such as when the subject is moving quickly, when there is a large
amount of camera shake, or when there are multiple subjects that look alike, the camera may not
be able to register or track a subject, or the camera may track a different subject. Additionally, the
subject may not be tracked properly depending on factors such as the subject’s size and
brightness.
When the camera enters standby mode (A23), the registration of the subject is canceled. To
prevent this, setting a longer time for the auto off function (E73) is recommended.
Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination“ (A75) for more information.
Autofocus Mode
Choose how the camera focuses.
B Note on Autofocus Mode
Some features cannot be used in combination with other menu settings. See “Features Not Available
in Combination“ (A75) for more information.
C Autofocus Mode for Movie Recording
Autofocus mode for movie recording can be set with Autofocus mode (E51) in the movie menu.
Rotate the mode dial to j
,
k
,
l, m or M M d button M j
,
k
,
l, m or M tab (A10)
M Autofocus mode
Option Description
A
Single AF
(default
setting)
The camera focuses only when the shutter-release button is
pressed halfway.
B Full-time AF
The camera focuses continuously until the shutter-release button
is pressed halfway. Use with moving subjects. A sound will be
heard while the camera focuses.