Filter
Top Products
Reference Section
E13
1 Turn off the camera and connect it to the TV.
• Make sure that the plugs are properly oriented. Do not insert or remove the
plugs at an angle when connecting or disconnecting them.
2 Set the TV’s input to external input.
• See the documentation provided with your TV for details.
3 Press and hold down the c
button to turn on the camera.
• Images are displayed on the TV.
• The camera monitor does not turn on.
C Using a TV Remote Control (HDMI Device Control)
The remote control of an HDMI-CEC-compatible TV can be used to select images,
start and pause movie playback, switch between full-screen playback mode and
four-image thumbnail display, etc.
• Set HDMI device control (E71) of TV settings to On (default setting) in the
setup menu, and then connect the camera and TV using an HDMI cable.
• Aim the remote control at the TV when operating it.
Connecting the Camera to a TV (Viewing Images
on a TV)
HDMI micro connector
(Type D)
to HDMI jack