Nikon COOLPIXP600BK Digital Camera User Manual


 
E79
Reference Section
All images are hidden.
There are no images available for a slide
show, etc.
There are no images that can be displayed on
the image selection screen for deletion.
This image cannot be
deleted.
The image is protected.
Disable protection.
E50
Raise the flash.
When the scene mode is Scene auto
selector, you can take an image even if the
flash is lowered but the flash will not fire.
When the scene mode is Night portrait or
Backlighting with HDR set to Off, you must
raise the flash to take an image.
43
42, 46
No access.
The camera could not receive the
communication signal from the smart device.
Select Connect to smart device in the Wi-Fi
options menu, and wirelessly connect the
camera and smart device again.
98, E58
Could not connect.
The camera failed to establish the connection
while receiving the communication signals from
the smart device. Select a different channel for
Channel in Options in the Wi-Fi options menu
and establish the wireless connection again.
98, E58
Wi-Fi connection
terminated.
A cable was connected to the camera while the
camera and smart device were wirelessly
connected, the battery level became low, or the
connection was aborted due to poor
connectivity. Check the status of the camera and
establish the wireless connection again.
98, E58
Lens error
A lens error occurred.
Turn the camera off and then on again. If the
error persists, contact your retailer or Nikon-
authorized service representative.
26
Communications
error
An error occurred while communicating with
the printer.
Turn the camera off and reconnect the USB
cable.
E14
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the
battery, and turn the camera on. If the error
persists, contact your retailer or Nikon-
authorized service representative.
26
Display Cause/Solution A