Filter
Top Products
27
The Basics of Shooting and Playback
C The Auto Off Function
• The time that elapses before the camera enters standby mode is about 1 minute.
The time can be changed using the Auto off setting in the setup menu (A95).
• While the camera is in standby mode, the monitor turns back on if you perform any
of the following operations:
- Press the power switch, shutter-release button, c button, or b (e movie-
record) button.
- Rotate the mode dial.
C Monitor Display
Press the s button to switch between showing and hiding the photo
information or shooting information that is displayed in the monitor (A10).
1/2 50 F5. 6
840
25m 0s
25m 0s
1/250 F5.6
840
25m 0s
Flashes
No operations
performed
3 min
Camera turns off.Camera enters
standby mode.
No operations
performed