Filter
Top Products
140
t
A Exposure and Flash Bracketing
In continuous low speed and continuous high speed modes, shooting
will pause after the number of shots specified in the bracketing
program have been taken.
Shooting will resume the next time the
shutter-release button is pressed.
In self-timer mode, the camera will
take the number of shots selected in Step 2 on page 137 each time the
shutter-release button is pressed, regardless of the option selected for
Custom Setting c3 (Self-timer)>Number of shots (0 252); the interval
between shots is however controlled by Custom Setting c3 (Self-
timer)>Interval between shots.
In other modes, one shot will be
taken each time the shutter-release button is pressed.
If the memory card fills before all shots in the sequence have been
taken, shooting can be resumed from the next shot in the sequence
after the memory card has been replaced or shots have been deleted to
make room on the memory card.
If the camera is turned off before all
shots in the sequence have been taken, bracketing will resume from the
next shot in the sequence when the camera is turned on.
A Exposure Bracketing
The camera modifies exposure by varying shutter speed and aperture
(programmed auto), aperture (shutter-priority auto), or shutter speed
(aperture-priority auto, manual exposure mode).
If On is selected for
Auto ISO sensitivity control > Auto ISO sensitivity control (0 72) in
exposure modes P, S, and A and no flash is attached, the camera will
modify exposure by varying ISO sensitivity and only vary shutter speed
and/or aperture if the limits of exposure system are exceeded.
Custom
Setting e7 (Auto bracketing (mode M), 0 260) can be used to change
how the camera performs exposure and flash bracketing in manual
exposure mode.
Bracketing can be performed by varying flash level
together with shutter speed and/or aperture, or by varying flash level
alone.