Nikon Df Digital Camera User Manual


 
268
U
Aperture setting: If Sub-command dial is selected, aperture can
only be adjusted with the sub-command dial (or with the main
command dial if On is selected for Change main/sub).
If
Aperture ring is selected, aperture can only be adjusted with
the lens aperture ring and the camera aperture display will show
aperture in increments of 1 EV (aperture for type G and E lenses
is still set using the sub-command dial).
Note that regardless of
the setting chosen, the aperture ring must be used to adjust
aperture when a non-CPU lens is attached.
Menus and playback: If Off is selected, the multi selector is used to
choose the picture displayed during full-frame playback,
highlight thumbnails, and navigate menus.
If On or On (image
review excluded) is selected, the main command dial can be
used to choose the picture displayed during full-frame playback,
move the cursor left or right during thumbnail playback, and
move the menu highlight bar up or down.
The sub-command
dial is used to display additional photo information in full-frame
playback and to move the cursor up or down during thumbnail
playback.
Select On (image review excluded) to prevent the
command dials from being used for playback during image
review.
While menus are displayed, rotating the sub-command
dial right displays the sub-menu for the selected option, while
rotating it left displays the previous menu.
To make a selection,
press 2 or J.