Nikon Df Digital Camera User Manual


 
354
n
Release
Release mode S (single frame), CL (continuous low speed),
C
H (continuous high speed), J (quiet shutter-release),
E (self-timer), M
UP (mirror up)
Frame advance rate 1–5 fps (CL) or 5.5 fps (CH)
Self-timer 2 s, 5 s, 10 s, 20 s; 1–9 exposures at intervals of 0.5, 1, 2,
or 3 s
Exposure
Metering TTL exposure metering using 2016-pixel RGB sensor
Metering method Matrix: 3D color matrix metering II (type G, E, and D
lenses); color matrix metering II (other CPU lenses);
color matrix metering available with non-CPU lenses
if user provides lens data
Center-weighted: Weight of 75% given to 12 mm circle in
center of frame.
Diameter of circle can be changed to
8, 15, or 20 mm, or weighting can be based on
average of entire frame (non-CPU lenses use 12-mm
circle)
Spot: Meters 4 mm circle (about 1.5% of frame)
centered on selected focus point (on center focus
point when non-CPU lens is used)
Range (ISO 100, f/1.4
lens, 20 °C/68 °F)
Matrix or center-weighted metering: 0–20 EV
Spot metering: 2–20 EV
Exposure meter coupling Combined CPU and AI (collapsible metering coupling
lever)
Exposure mode Programmed auto with flexible program (P); shutter-
priority auto (S); aperture-priority auto (A); manual (M)
Exposure compensation –3 – +3EV in increments of
1
/3 EV
Exposure bracketing 2–5 frames in steps of
1
/3,
2
/3, 1, 2, or 3 EV
Flash bracketing 2–5 frames in steps of
1
/3,
2
/3, 1, 2, or 3 EV
White balance
bracketing
2–3 frames in steps of 1, 2, or 3
ADL bracketing 2 frames using selected value for one frame or 3-5
frames using preset values for all frames
Exposure lock Luminosity locked at detected value with A AE-L/AF-L
button