Filter
Top Products
28
X
Adjust Viewfinder Focus
The camera is equipped with diopter adjustment to accommodate
individual differences in vision.
Check that the display in the
viewfinder is in focus before framing pictures in the viewfinder.
1 Turn the camera on.
Remove the lens cap and turn the camera on.
2 Focus the viewfinder.
Rotate the diopter adjustment
control until the AF area
brackets are in sharp focus.
When operating the diopter
adjustment control with your
eye to the viewfinder, be careful not to put your fingers or
fingernails in your eye.
AF area brackets
Viewfinder not in focus Viewfinder in focus
A Adjusting Viewfinder Focus
If you are unable to focus the viewfinder as described above, select
single-servo autofocus (AF-S; 0 59), single-point AF (0 62), and the
center focus point (0 65), and then frame a high-contrast subject in the
center focus point and press the shutter-release button halfway to focus
the camera.
With the camera in focus, use the diopter adjustment
control to bring the subject into clear focus in the viewfinder.
If
necessary, viewfinder focus can be further adjusted using optional
corrective lenses (0 324).