Filter
Top Products
30
s
3 Check the number of exposures remaining.
The control panel shows the number of
photographs that can be taken at
current settings (values over 1000 are
rounded down to the nearest hundred;
e.g., values between 2900 and 2999 are
shown as 2.9 k).
When this number
reaches zero, A will flash in the exposure-count displays while
the shutter-speed displays will show a flashing n or j.
Insert another memory card or delete some photos.
Choose an Exposure Mode
Lift the exposure mode dial and rotate it to
the desired setting.
A Image Sensor Cleaning
The camera vibrates the low-pass filter covering the image sensor to
remove dust when the camera is turned on or off (0 329).