Filter
Top Products
53
More on Playback
Taking a Closer Look: Playback Zoom
Rotating the zoom control to g (i) (playback zoom)
during full-frame playback mode (A 28) zooms the
current picture in 3×, with the center of the picture
displayed in the monitor (Quick Playback Zoom).
The guide at lower right shows which portion of the
picture is enlarged. Change the portion of the picture
displayed by pressing the multi selector H, I, J or K.
When using playback zoom with pictures shot using the
face-priority function, the picture will be enlarged, with the
face recognized during shooting, at the center of the
monitor. If more than one face was recognized, the picture
would be enlarged with the face, on which focus was
acquired, at the center of the monitor. Press the multi
selector H, I, J, or K to display a different recognized
face.
The magnification ratio can be changed further by
operating the zoom control. The zoom ratio will be
displayed in the monitor, and can
be increased up to 10
×. The following operations can be
performed while pictures are zoomed in.
To Use Description A
Zoom in g (i)
Zoom increases each time the zoom control is rotated
to
g
(
i
), to a maximum of 10×.
Zoom also increases by rotating the command
dial to right.
–
Zoom out f (h)
Zoom decreases each time the zoom control is
rotated
to f (h). When the magnification ratio
reaches 1×, the display returns to full-frame
playback mode.
Zoom also decreases by rotating the command
dial to left.
–
View other areas
of picture
Press the multi selector H, I, J or K to move
to areas of the picture not visible in the monitor.
10
Switch to full-
frame playback
k
Press k.28
Crop picture
d
Press d to crop current picture to contain only
the portion visible in the monitor.
56
Switch to
shooting mode
c
Press c or the shutter-release button to switch
to the mode selected with the mode dial.
28
X3.0
X2.0
X4.0