Filter
Top Products
55
More on Playback
Taking a Closer Look: Playback Zoom
Rotating the zoom control to g (i) during full-frame
playback mode (A 28) zooms the current picture in 3×,
with the center of the picture displayed in the monitor.
The guide at lower right shows which portion of the
picture is enlarged.
The following operations can be performed while
pictures are zoomed in.
Pictures Taken in Face Priority
When the zoom control is rotated to g (i) during full-
frame playback mode for pictures taken in Face priority
(A 103), the picture will be enlarged using the face
(which was focused on during shooting time) as the
centralized point.
If several faces are recognized, the picture will be
enlarged using the face (which was focused on during
shooting time) as the centralized point, and pressing the multi selector H, I, J,
or K will enable you to switch between the people’s faces.
You can change the zoom ratio by rotating the zoom control to g (i) or f (h).
To Use Description A
Zoom in g (i)
Zoom increases each time the zoom control is
rotated to g (i), up to about 10×.
Zoom also increases by rotating the command
dial to right.
–
Zoom out f (h)
Zoom decreases each time the zoom control is
rotated
to f (h). When the magnification ratio
reaches 1×, the display returns to full-frame
playback mode.
Zoom also decreases by rotating the command
dial to left.
–
View other areas
of picture
Press the multi selector H, I, J or K to move
to areas of the picture not visible in the monitor.
10
Switch to full-
frame playback
k
Press k.28
Crop picture
d
Press d to crop current picture to contain only
the portion visible in the monitor.
58
Switch to
shooting mode
c
Press c or the shutter-release button to switch
to the mode selected with the mode dial.
28
3.
3.0
3.0
2.
2.
0
0
2.0