Filter
Top Products
START
OLYMPUS OPTICAL CO., LTD.
San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan
(Customer support) Tel. 0426-42-7499 Tokyo
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000
(Technical support) Tel. 1-888-553-4448 (Toll-free) (First 30 days after purchase)
Tel. 1-631-844-5520 (After 30 days)
(E-Mail) distec@olympus.com
OLYMPUS OPTICAL CO. (EUROPA) GMBH.
(Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany Tel. 040-237730
(Letters) Postfach 10 49 08, 20034 Hamburg, Germany
«Olympus Web site» http://www.olympus.com
Viewing Pictures
1. Make sure the lens barrier is closed.
If the lens barrier is open, slide it to the
closed position.
Push down the flash to lock it in place.
2. Press and hold the monitor button for a moment.
The last picture you took appears on the monitor.
Lens barrier
3. To view other images, press the arrow pad key.
When you want to cancel viewing, press the monitor
button again.
E
N
D
Shooting a Close Subject (at 0.2 m to 0.5 m/8 in. to 1.6 ft.)
Using the Macro Mode
1. Open the lens barrier.
Slide the lens barrier until the flash pops up; the camera will turn on and the
lens will come out.
2. Press the OK/menu button.
The monitor shows the Shooting mode menu.
Press
3. Select by pressing the or arrow pad key.
4. Select “ON” by pressing the or arrow pad key.
5. When you have made your selection, press the OK/menu
button to enter the Macro mode.
When you want to cancel shooting,
close the lens barrier.
Push down the flash to lock it in place.
VT277002
Using this camera for the first time
QUICK START
GUIDE
Arrow pad
Monitor button
Moves 10 images
Moves 1
image
Moves 1
image
Moves 10 images
Arrow pad
OK/menu button
1/3
AUTO
OFF
OFF
DIGITAL ZOOM
END
OK
SELECT
1/3
AUTO
OFF
OFF
END
OK
SELECT
DIGITAL ZOOM
DIGITAL ZOOM
Press
Zooming in on a Subject
To use the optical zoom
1. Check that the lens barrier is open.
2. Slide the zoom lever to to zoom in the image
up to 3X, and slide to to zoom out the image.
To use the digital zoom
1. Check that the lens
barrier is open.
2. Press the OK/menu
button once.
The monitor shows the
Shooting mode menu 1/3.
3. Select “DIGITAL ZOOM” by pressing the or arrow pad key.
The initial setting is “OFF”.
4. Select “ON” by pressing the or arrow pad key, then press the OK/
menu button once.
Now you can use the digital zoom.
5. Slide the zoom lever to to zoom in the image, and slide to to zoom out
the image.
Arrow pad
OK/menu
button
1/3
AUTO
OFF
OFF
DIGITAL ZOOM
END
OK
SELECT
Press
T
W
Digital Zoom
Appears only when using digital zooming (and
does not appear when using only optical
zooming).
The zoom bar slides toward T when zooming-
in, and toward W when zooming-out.
C
-
1
D
-
15 0
C
-
1
Zoom
D
-
15 0
Zoom
Printed in Japan