Filter
Top Products
86
8
Connecting the camera to a computer
Connecting the camera to a computer
Use the USB cable provided with the camera to connect the camera to
your computer.
1 Make sure the
POWER switch
is located at
OFF.
2 Plug the USB cable into the USB port on the computer.
• Refer to your computer’s instruction manual to locate the position of the
USB port.
3 Plug the other end of the USB
cable into the camera’s USB
connector.
4 Slide the POWER switch to q.
• The monitor turns on and the selection
screen for the USB connection is displayed.
5 Select [PC], and press Z.
6 The camera is recognized by the
computer.
•Windows
When you connect the camera to your
computer for the first time, the computer
attempts to recognize the camera. Click
“OK” to exit the message that is displayed.
The camera is recognized as a “Removable Disk”.
•Macintosh
The iPhoto program is the default application for managing digital images.
When you connect your digital camera for the first time, the iPhoto application
starts automatically, so close this application and start OLYMPUS Master.
Note
• The camera functions are disabled while the camera is connected to a
computer.
POWER switch
USB connector
USB connector cover
d4255_e_00_0_bookfile.book Page 86 Monday, June 6, 2005 11:08 AM