Filter
Top Products
96
9
Appendix
Troubleshooting
Error codes
Monitor indication Possible cause Corrective action
q
NO CARD
The card is not inserted,
or it cannot be
recognized.
Insert a card or insert a different
card.
If the problem persists, format the
card. If the card cannot be
formatted, it cannot be used.
q
CARD ERROR
There is a problem with
the card.
This card cannot be used. Insert a
new card.
q
WRITE-
PROTECT
Writing to the card is
prohibited.
The recorded image has been
protected (read-only) on a
computer. Download the image to a
computer and cancel the read-only
setting.
q
CARD FULL
The card is full. No more
pictures can be taken or
no more information
such as print
reservation can be
recorded.
Replace the card or erase unwanted
pictures. Before erasing, download
important images to a PC.
L
NO PICTURE
There are no pictures in
the card.
The the card contain no pictures.
Record pictures.
r
PICTURE
ERROR
There is a problem with
the selected picture and
it cannot be played back
on this camera.
Use image processing software to
view the picture on a computer. If
that cannot be done, the image file
is damaged.
CARD-COVER
OPEN
The card cover is open. Close the card cover.
g
BATTERY
EMPTY
The battery power is
exhausted.
Replace the batteries with new
ones, or charge the batteries.
This card cannot be
used with this camera
or the card is not
formatted.
• Format the card or replace.
• Select [POWER OFF] and press
Z. Insert a new card.
• Select [FORMAT] and press Z.
All data on the card is erased.
d4255_e_00_0_bookfile.book Page 96 Monday, June 6, 2005 11:08 AM