Olympus D-510 ZOOM Digital Camera User Manual


 
140
Picture Problems
The picture is out of focus
The camera was jarred when the shutter button was pressed. Hold
the camera firmly and press the shutter button smoothly.
The viewfinder AF target mark was not positioned on the subject.
Position the autofocus frame on the subject, or use the focus lock.
The lens is dirty. Clean the lens with a soft, dry cloth.
The mode was not selected correctly. Shoot in the macro mode
where the subject is within the range of 0.2m (8) to 0.8m (31). For
greater distances, shoot in the standard mode.
The shutter button was pressed while standing directly in front of the
camera when using the selftimer. When using the selftimer, press
the shutter button while looking into the viewfinder, not while standing
in front of the camera.
The flash was needed to take a clear picture, but the camera was set
to No Flash. The shutter speed become slower and the exposure
time becomes longer, so use the tripod or hold the camera as steady
as possible to avoid camera movement.
Quick Focus was used in the wrong focal range. Use the correct
Quick Focus setting for the distance you’re shooting at.
The picture is too bright
The flash is set to fill-in flash mode. Set the flash a different mode.
The subject being shot is excessively bright. Use the exposure
compensation feature, or change the angle of the camera.
The picture is too dark
The flash was blocked by a finger. Hold the camera correctly,
keeping your fingers away from the flash.
The subject was out of the working range of the flash. Shoot within
the flash working range.
The flash mode is set to No Flash despite that lighting conditions
require a flash. Change the flash mode setting to one appropriate
for the surrounding lighting conditions.
The subject was too small or was backlit. Set the flash to fill-in
mode, or use the spot metering mode.
The picture was taken in the sequence mode. Pictures will appear
dark in the sequence mode because of the fast shutter speed,
especially in dim light.