Filter
Top Products
52
When Not Able to Focus on a
Subject While Shooting
Determine the Position of the Subject After Focusing
Focus Lock
If your main subject is not centered inside the AF target mark, use the
focus lock feature explained below:
1 Open the lens barrier.
• The camera turns on in
shooting mode.
2 Look through the viewfinder
and position the AF target
mark on the subject you wish
to focus on.
3 Half-press the shutter button
so the green lamp next to the
viewfinder lights up.
• The subject is now in focus
and exposure is set.
4 Keep the shutter button half-
pressed while you reposition
your subject(s) within the
picture frame.Then full-press
the shutter button.
CAUTION
• If the flash is pressed down while taking a picture, it does not fire and could
cause the image to be dark.
Viewfinder
AF target mark
Half-press
Full-press
Shutter
button