Filter
Top Products
Menu operations
EN
29
• The factory default settings are displayed in gray ( ).
All existing data, including protected pictures, are erased when the internal memory or card is formatted
(images registered to “My Favorite” are not erased). Make sure that you save or transfer important data to a
computer before formatting.
• Make sure there is no card inserted in the camera when formatting the internal memory.
• Be sure that the card is inserted in the camera when formatting the card.
• Before using non-Olympus cards or cards which have been formatted on a computer, you must format them
with this camera.
Insert the optional card into the camera. Copying data does not erase the picture in the internal memory.
• It takes some time to back up data. Check that the battery is charged before starting the copy.
You can select a language for on-screen display. Available languages vary depending on where you
purchased this camera.
You can add other languages to your camera with the provided OLYMPUS Master software.
The pixel mapping feature allows the camera to check and adjust the CCD and image processing functions.
It is not necessary to operate this function frequently. Approximately once a year is recommended. Wait at
least one minute after taking or viewing pictures to allow the pixel mapping function to perform properly. If you
turn the camera off during pixel mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press .
SETUP menus
MEMORY FORMAT (FORMAT)...........................Formatting the internal memory or card
BACKUP ..................................................Copying pictures in the internal memory to the card
W................................................................................................. Selecting a display language
PIXEL MAPPING......................................................Adjusting the image processing function
K/q........................................................... Turning on the camera with the K or q button
YES
• Pressing K turns on the camera and starts the camera in the shooting
mode.
• Pressing q turns on the camera and starts the camera in the playback
mode.
NO The power is not turned on. To turn on the camera, press o button.
Playback mode
Shooting mode
* A card is required.
MEMORY FORMAT
(FORMAT
*
)
BACKUP
*
W
PIXEL MAPPING
K/q
PW ON SETUP
MENU COLOR
SOUND SETTINGS
s
X
VIDEO OUT
POWER SAVE
SETUP
SET
OK
EXIT
MENU
SCENE
SCENE
CAMERA
MENU
CAMERA
MENU
RESET
RESET
SETUP
SETUP
SILENT
MODE
SILENT
MODE
IMAGE
QUALITY
IMAGE
QUALITY
MENU
SET
OK
EXIT
ERASE
ERASE
PLAYBACK
MENU
PLAYBACK
MENU
PERFECT
FIX
PERFECT
FIX
MY
FAVORITE
MY
FAVORITE
SLIDE-
SHOW
SLIDE-
SHOW
SETUP
SETUP
SILENT
MODE
SILENT
MODE
PRINT
ORDER
PRINT
ORDER
EDIT
EDIT
d4362_63_e_0000_7.book Page 29 Tuesday, November 13, 2007 8:43 PM