Filter
Top Products
Menu operations
30
EN
• Select [2] and press to set a still picture in the internal memory or card as the startup screen.
• Select [MY FAVORITE] and press to set a still picture registered in “My Favorite” as the startup screen.
g “MY FAVORITE Viewing and registering pictures in My Favorite” (P. 25)
• [VOLUME] cannot be set in the following cases:
• When [SCREEN] is set to [OFF]
• When [SILENT MODE] is set to [ON]
• Select [MY FAVORITE] and press Y to set a still picture registered in “My Favorite” as the background.
g “MY FAVORITE Viewing and registering pictures in My Favorite” (P. 25)
You can set the following items with [SOUND SETTINGS]:
• Setting the type of button operation sounds and volume. (BEEP)
• Selecting the sound of the shutter button. (SHUTTER SOUND)
• Adjusting the volume of the camera warning sound. (8)
• Adjusting the volume during playback. (VOLUME)
• You can set all the sounds muted at once by setting [SILENT MODE].
g “SILENT MODE Muting operational sounds” (P. 24)
The date and time is saved with each image and is used in the file name.
If the date and time are not set, the [X] screen is displayed each time the camera is turned on.
PW ON SETUP.............................................................Setting the startup screen and volume
SCREEN
OFF (No picture is displayed.) / 1 / 2 / MY FAVORITE
VOLUME OFF (No sound) / LOW / HIGH
MENU COLOR...............................................Setting the menu screen color and background
NORMAL / COLOR1 / COLOR2 / COLOR3 / MY FAVORITE
SOUND SETTINGS...............................................Setting the sound output from the camera
BEEP SOUND TYPE
1/2
VOLUME OFF (No sound) /
LOW / HIGH
SHUTTER SOUND SOUND TYPE
1/2/3
VOLUME OFF (No sound) /
LOW / HIGH
8 OFF (No sound) /
LOW / HIGH
q VOLUME
• Press ON to adjust the volume.
• You can adjust the volume to one of five
levels or mute the volume.
s..............................................................................................Adjusting the monitor brightness
BRIGHT/
NORMAL
X............................................................................................................Setting the date and time
X
YM
YMD
D TIME
2008 08 26 12 30
MENU
CANCEL
Y-M-D
Cancels the setting
Hour
Date formats
(Y-M-D, M-D-Y,
D-M-Y)
Minute
• The first two digits of [Y] are fixed.
• The time is displayed in the 24-hour format.
• To set the time precisely, with the cursor
either on “Minutes” or “Y/M/D”, press as
the time signal strikes 00 seconds.
d4362_63_e_0000_7.book Page 30 Tuesday, November 13, 2007 8:43 PM