Filter
Top Products
46
EN
Getting to know your camera better
Movies
• When using a non-Olympus card or a card used for other purposes with a computer, etc., use the
[FORMAT] function to format the card.
g “MEMORY FORMAT (FORMAT) Formatting the internal memory or card” (P. 29)
• An image or movie is being recorded or downloaded (when connected to a computer).
• Do not do any of the following while the card access lamp is blinking. Doing so may prevent the
image data from being saved and render the internal memory or card unusable.
• Open the battery/card compartment cover.
• Remove the battery and card.
• Performing any of the following operations when not actually taking pictures can deplete the battery
power.
• Repeatedly pressing the shutter button halfway
• Repeatedly using the zoom
• To minimize the battery consumption, set [POWER SAVE] to [ON] and turn off the camera
whenever it is not in use.
g “POWER SAVE Setting the camera to the power save mode” (P. 31)
• Some items can not be selected using the arrow pad when menus are displayed. (The menu items
displayed in gray cannot be selected.)
• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set: [%] and [#],
etc.
• Some functions cannot be used when there is no card in the camera.
[PANORAMA], [PRINT ORDER], [FORMAT], [BACKUP]
• Functions can not be changed when the mode dial is set to R.
• To return the changed shooting settings to default settings while shooting, set [RESET] to [YES].
g “RESET Changing the shooting functions back to default settings” (P. 22)
• All shooting settings except P mode return to default settings when the camera is turned off.
IMAGE SIZE
FRAME
RATE
Continuous recording length
Internal memory Using a 1 GB card
With
sound
Without
sound
With
sound
Without
sound
C
640 × 480
N
27 sec. 27 sec.
9 min.
25 sec.
9 min.
28 sec.
O
54 sec. 54 sec.
18 min.
44 sec.
18 min.
56 sec.
E
320 × 240
N
1 min.
13 sec.
1 min.
14 sec.
25 min.
26 sec.
25 min.
49 sec.
O
2 min.
24 sec.
2 min.
29 sec.
50 min.
7 sec.
51 min.
38 sec.
Using a new card
The card access lamp is blinking
Extending the useful life of the battery
Functions that cannot be selected from menus/Functions that cannot be
selected even by pressing the function buttons
To return the settings of functions to default settings
d4362_63_e_0000_7.book Page 46 Tuesday, November 13, 2007 8:43 PM