Filter
Top Products
Button operations
16
EN
Press Y# in shooting mode to select the flash mode.
Press to set.
Displays the top menu.
The monitor lights brighter when is pressed in shooting mode. If there is no operation for
10 seconds, it dims back to the original brightness.
• When [BRIGHT] is selected in [s], the monitor brightness does not change.
In playback mode, select the picture you want to erase, and press S.
• Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.
g “0 Protecting pictures” (P. 25)
Shooting mode: Zooming in on your subject
Optical zoom: 4×
Digital zoom: 4× (optical zoom × digital zoom: Max. 16×)
Y# button Flash shooting
AUTO Flash auto The flash fires automatically in low light or backlight conditions.
! Red-eye reduction
flash
This emits pre-flashes for red-eye reduction.
# Fill-in flash The flash fires regardless of the available light.
$ Flash off The flash does not fire.
m button Displaying the top menu
/S button Increasing the brightness of the monitor (Backlight boost)/
Erasing pictures
Increasing the brightness of the monitor (Backlight boost)
S Erasing pictures
Zoom lever Zooming while shooting/Close-up playback
a
b
c
d
Zoom out:
Turn the zoom
lever to the W-
side.
Zoom in:
Turn the zoom
lever to the T-
side.
The zoom bar appears white when the current zoom position is within
the optical zoom area. When the digital zoom activates, the zoom bar
appears yellow and the image is further enlarged.
Zoom bar
W
W
T
T
P
4
4
IN
8
M
8
M
N
ORM
N
ORM
W
W
T
T
P
4
4
IN
8
M
8
M
N
ORM
N
ORM
d4360_e_0000_7.book Page 16 Thursday, December 13, 2007 3:17 PM