Filter
Top Products
23
TAKING
PICTURES
FOCUS LOCK
If your subject is not within the AF target mark, you can bring it into focus by
following the focus lock procedure below.
1
Open the lens barrier.
The camera turns on in the Record
mode.
2
Look into the viewfinder and
position the AF target mark
over the subject.
3
Press the shutter button
halfway.
The focus is adjusted and locked
together with the exposure and the
green lamp on the right of the
viewfinder lights.
4
Recompose your shot,
keeping the shutter button
pressed halfway.
5
Press the shutter button down
fully.
Note
If the green lamp blinks when the shutter button is pressed
halfway, focus may be incorrect. Release your finger from the
shutter button, hold the camera securely again and half-press
the button again.
Green lamp
Green lamp
AF target mark