Filter
Top Products
27
PLAYING BACK
PICTURES
ERASING AN IMAGE
1
Close the lens barrier and
press the button.
The camera turns on in the Play
mode.
2
Press the / buttons and
play back the image you want
to erase.
See “Checking recorded images”
(
p. 25).
3
Press the button for more
than 1 second.
The monitor shows the single-image
erase menu.
4
Select [ ERASE] using the
/ button and press the
button.
The selected image is erased.
Note
Erasure is also possible by pressing the button while the
image you want to erase is displayed and selecting [
] on the
Play menu.
Caution
• Erasure is not possible if the image to be erased is protected
or a write protect seal is attached to the SmartMedia card.
Unprotect the image or remove the write protect seal on the
SmartMedia card before attempting to erase the image.
• Once erased, images can not be restored. Check each image
before erasing to avoid accidentally erasing images you want
to keep.