Filter
Top Products
37
RECORDING
FUNCTIONS
5
Adjust the exposure
compensation setting using
the / buttons and
press the button.
Press [–] to darken image or
[+] to brighten image.
The exposure compensation setting
is now completed.
Press the
button again to exit the
menu.
6
Take a picture.
Note
• The setting of exposure compensation returns to ±0.0 (default
setting) when the clear settings value is [RESET] and the lens
barrier is closed. See “Clear settings” (
p.75).
• When the exposure is corrected, the brightness of the image
displayed on the monitor also changes. However, the variation
may be less noticeable when the subject is dark. In this case,
check the recorded image to confirm that exposure is
satisfactory.
Caution
• If the flash is used, the image brightness (exposure) may
differ from the intended brightness (exposure).
• The exposure compensation can not correct the image
brightness if the surroundings of the subject are extremely
bright or dark.
EXPOSURE COMPENSATION