Filter
Top Products
40
RECORDING
FUNCTIONS
SEQUENCE MODE
The Sequence mode allows you to take a rapid succession of still images
by pressing and holding the shutter button (up to 8 images at approx. 1.2
frames per second). You can choose the best image from a series of
sequential shots. When you have found your best shot, you can also erase
the rest of the images.
See “
Erasing an image
” ( p. 27).
1
Open the lens barrier
The camera turns on in the Record
mode.
2
Press the button.
The monitor shows the Camera
menu.
3
Select [CAMERA] using the
/ buttons, and press
the button.
4
Select [DRIVE] using the /
buttons, and press the
button.
5
Select [ SEQUENCE] using
the / buttons and
press the button.
The sequence mode setting is now
completed.
Press the button again to exit the
menu.