Filter
Top Products
43
RECORDING
FUNCTIONS
SPOT METERING MODE
Your subject may appear dark when it is against a bright background. In this
case, change the metering setting to SPOT. The camera calculates the
exposure using only the lighting information at the center of the viewfinder
without it being affected by the background light.
Note
Metering settings
ESP (
): The light in the center of the viewfinder and in
the surrounding area are measured separately
to obtain the optimum exposure. (No mark is
displayed on the LCD monitor)
SPOT (
):
Only the light in the center of the viewfinder is measured
to obtain the correct exposure for the subject.
1
Open the lens barrier.
The camera turns on in the Record mode.
2
Press the button.
The monitor shows the Camera
menu.
3
Select [CAMERA] using the
/ buttons and press
the button.
4
Select [ ] using the /
buttons and press the
button.
5
Select [ SPOT] using the
/ buttons and press
the button.
The spot metering setting is now
completed.
Press the button again to exit the
menu.
6
Position the AF target mark
over the subject in the
viewfinder, and take a picture.
Note
The metering mode returns to ESP (default setting) when the
clear settings value is [RESET] and the lens barrier is closed.
See “Clear settings” (
p.75).