Olympus C-211 Digital Camera User Manual


 
113
Using the Shooting menu
This section explains the general procedure for using the Shooting menu. For details
about the available settings, refer to the explanations provided later in this chapter.
1 Set the mode dial to RECORD ( ).
• The camera enters RECORD mode.
2 Press the MENU button ( ).
• The monitor displays the Shooting menu.
3 Use or to move the menu pointer to
the appropriate line on the menu.
(In the example in diagram 3at left, the
White Balanceline has been selected.)
• The selected line is highlighted in green.
• The current setting is shown in brackets.
4 Press .
• The monitor displays the available settings.
5 Use or to move the pointer to the
desired setting.
(In the example in diagram 5at left, the
white balance is set to overcast [ ].)
• The selected setting is highlighted in green.
6 Press the OK button.
• The new setting becomes effective, and the
Shooting menu reappears. The new setting
is now shown in the brackets.
7 If you wish to access another item on the
menu, return to Step 3. When you are
finished with the Shooting menu, press the
OK button again.
• The menu disappears from the monitor.
6
Advanced Shooting Techniques
[
OFF
]
[
ESP
]
[
HQ
]
[
AUTO
]
CHANGE
END
WB
[
]
OK
SET
BACK
AUTO
WB
[
OFF
]
[
ESP
]
[
HQ
]
[
]
CHANGE
END
WB
[
]
2
6 7
3 4 5
1
Menu pointer
3
5
7