139
Using the Playback Menu
This section explains the general procedure for using the Playback menu. For details
about the available settings, refer to the explanations provided later in this chapter. For
information about how to select an image on the screen (before opening this menu)
see page 55 and 56.
1 Set the mode dial to PLAY ( ).
• The camera enters PLAY mode, and the
menu displays the last image that you took.
2 Press the MENU button ( ).
• The monitor displays the Playback menu.
3 Use or to move the menu pointer to
the desired operation type.
(In the example diagram at left, Autoplay
[ ] has been selected.)
• The selected line is highlighted in green.
4 Press .
• The monitor displays the available
operations.
5 Use or to move the pointer to the
desired operation.
(In the example diagram at left, FAST
autoplay is selected.)
• The selection is highlighted in green.
6 Press the OK button.
• The menu disappears and the camera
carries out the selected operation.
To close the menu without starting the selected operation...
Pressing the MENU button ( ) rather than the OK button.
7
Playback Techniques, Card Operations, and Digital Printing
[
FAST
]
CHANGE
END
OK
ENTER
BACK
SLOW
FAST
2
6
3 4 5
1
3
5