Filter
Top Products
157
7
Playback Techniques, Card Operations, and Digital Printing
Selecting Images for DPOF Printing
If you are planning to use a photofinishing service or DPOF-capable printer to make
your prints, you can use the camera’s digital-print feature to enter your print selections
directly on the card. After making your selections, you can drop the card off at a
photofinishing service, or load into a DPOF-capable printer, and only the images that
you selected will be printed.
Please note, however, that you cannot use this feature to select movie frames (images
identified by the mark). Please also understand that these settings have no effect
on Polaroid printing.
Selecting Images for DPOF Printing
1 Set the mode dial to PLAY ( ).
• The camera enters PLAY mode, and the
monitor displays the last image that you
took.
• If the monitor is displaying a movie frame (if
you see the mark), use the arrow pad to
select a different image.
2 Press the PRINT button ( ) twice.
• The monitor displays the print selection
menu.
(Pressing the button a third time returns you
to normal PLAY-mode operation.)
3 Select the appropriate item on the menu,
and then press the OK button.
: Select images frame by frame.
: Select all images in the card.
RESET: Deselect all images in the card.
• If you choose or RESET, the
camera selects or deselects all images in
the card, and returns you to normal PLAY-
mode operation. This concludes the
procedure.
• If you choose , you must now proceed to
make selections one frame at a time as
follows.
1
2 7
3 5 6
4
OK
ENTER
RESET
NEXT
Print selection menu