159
7
Playback Techniques, Card Operations, and Digital Printing
Selecting Images for DPOF Printing (continued)
To cancel...
At Step 3, you can cancel by pressing the PRINT button ( ) instead of the OK
button.You can also cancel at any time by turning the mode dial. But note that settings
you make at Step 6 are immediately effective.
And after you have printed the images...
Your print selections remain in the card even after you print the images at a DPOF
finisher or with a DPOF printer. After you have printed the images once, you may wish
to deselect all images (choose RESET at step 3 above) to be sure that you don’t print
them again.
HELP
• You can not change print selections if the card is protected by a write-protect seal.
• It may take a few moments for the monitor to display (or remove) the print mark.
• You cannot use this feature to select movie frames.