Filter
Top Products
RECORD-Mode Marker Display
By default, RECORD-mode screens show indicator marks identifying all shooting
settings that you have changed from their original values. If you prefer not to see these
marks, you can use this feature to switch them off.
For details about how to use the Setup menu, see “Using the Setup
menu” on page 167.
ON:
• Indicator marks are always displayed on
RECORD-mode screens. (This is the factory
setting.)
AUTO OFF:
• Marks appear for 3 seconds when you first
enter RECORD mode, and then go off. Marks
reappear for 3 seconds each time you change
a related setting.
170
[
1/2
]
CHANGE
[
ON
]
[
ON
]
[
LOW
]
[
NAME RESET
]
FILE
Select from menu...
Select to open the
mark setting screen.
OK
SET
BACK
AUTO OFF
ON
Make the setting...
HELP
• The AUTO OFF setting does not switch off the mark that appears at the upper left of
the monitor when you select a special function (movie shooting, whiteboard/
blackboard, external flash, or panorama).
NOTE
• If the setting is ON, half-pressing the shutter release button for longer than 3 seconds
forces the marks to temporarily disappear. The marks will reappear when you release
the half-press.