Filter
Top Products
27
Attaching the Strap and the Lens Cap
1 Attach the strap to the camera.
• Attach the strap as indicated by the arrows
at left. Then pull on it to make sure it’s
secure.
2 Tie the lens-cap string onto the strap, as
shown at left.
3 Attach the lens cap to the lens.
• Press inward on the cap’s latches, fit the cap
over the lens, and then release the latches.
(To remove the cap: Press on the latches
and pull the cap off.)
1
Getting Started
3
2
CAUTION
• Leave the lens cap attached when carrying the camera.
• Be sure to attach the strap correctly, as shown above. The camera may fall from the
strap if the attachment is incorrect. Olympus assumes no responsibility for damage
caused by improper attachment.