Filter
Top Products
32
Inserting the SmartMedia Card
Always insert a SmartMedia card before taking pictures.
1 Be sure that the mode dial is set to the
OFF position.
2 Open the card compartment cover.
3 Insert the card as shown in the illustration.
Use Olympus cards or generic 3V (3.3V)
cards only. Never use 5V cards.
If you are using a generic 3V (3.3V) card,
we recommend that you format the card in
the camera before taking pictures. (See
page 153.)
4 Close the cover, so that it clicks into place.
To remove a card: Follow the above procedure,
but pull the card outward at Step 3 (in the
direction opposite the arrow shown in the
illustration).
Contact area (the metallic side)