Filter
Top Products
TAKING A PICTURE
21
En
3
Take the picture.
Note
Press the shutter button gently. If it is pressed forcefully, the camera may
move causing the pictures to blur.
Never open the battery compartment cover, remove the battery or disconnect
the AC adapter while the card access lamp is blinking. Doing so could destroy
stored pictures or prevent storage of pictures you have just taken.
Recorded pictures are saved on the card regardless of whether the camera
is turned off or the battery is replaced or removed.
When taking pictures against strong backlight, the area of the picture in
shadow may appear colored.
When the shutter button is pressed, the memory gauge lights and the
picture is recorded to the card. The memory gauge changes according to
the current status. This indicator is not displayed while recording movies.
The card access lamp blinks while
the picture is recorded onto the card.
1/1000
1/1000
F2.8
F2.8
0.0
0.0
3072 2304
3072 2304
HQ
HQ
30
30
30
Press the shutter button fully.
Memory gauge
Memory gauge
a b c d
Before taking
any pictures
(Off)
Maximum reached
(All lit)
Wait until the indicator
turns off again before
taking more pictures.
After taking one
picture
(Lit)
After taking
several pictures
(Lit)
Shoot Shoot Shoot
Wait
d4227_basic_e_00_bookfile_7.book Page 21 Monday, October 25, 2004 10:12 AM