Filter
Top Products
105
ALL RESET: Functions that reset to factory default settings when set to
ON
Setting
Factory default
setting
ISO (P. 83) AUTO
(P. 65) ±0
DIGITAL ZOOM
OFF
(P. 60)
(for still pictures)
HQ
(P. 80)
WB (P. 86) AUTO
SHARPNESS (P. 87) NORMAL
CONTRAST (P. 87) NORMAL
Setting
Factory default
setting
P/A/S/M (P. 45 – 47) P
FNo (P. 48,50) F2.8
SHUTTER (P. 49) 1/500
(P. 85) ±0
ZOOM (P. 60) 40mm
FLASH MODE (P. 61) AUTO
(P. 66) OFF
DRIVE (P. 72)
Mode dial
setting
In the top menu, select MODE MENU TSETUP T ALL RESET T ON or
OFF, and press . Press again to cancel the menu.
~ “How to use the
menu”(P. 39)
Factory default setting: ON
Chapter 8
Useful Functions
All reset
— Saving the camera’s settings
This function lets you save the current camera settings when the power is
turned off. Available functions for ALL RESET are listed on the next page.
The ALL RESET setting (ON/OFF) applies to all the modes. If ALL RESET is
set in one mode, this setting applies to all the other modes, both shooting and
playback.
ON All settings are returned to the factory default settings after the power
is turned off.
Ex: When ALL RESET is set to ON, even if you change the record
mode setting to SQ1, it will return to HQ (factory default setting)
next time the camera is turned on.
OFF The settings made before the power is turned off are saved.