Filter
Top Products
Pictures you have taken do not appear on the monitor.
The viewfinder or monitor is hard to see.
127
Chapter 10
Troubleshooting (Cont.)
Possible cause Corrective action Ref. Page
The monitor does not turn on.
The monitor is not on.
The camera is in the sleep
mode.
BATTERY SAVE is set to
ON.
The diopter is not adjusted
properly.
The brightness of the
viewfinder or monitor is not
adjusted properly.
The monitor is exposed to
direct sunlight.
Vertical lines appear on the
image in the viewfinder or
monitor.
The power is off.
The camera is in the
shooting mode.
There are no pictures on
the card.
There is a problem with the
card.
The camera is connected
to a TV.
Press to turn on the monitor.
Operate the camera (press the
shutter button or the zoom
lever).
Set to OFF in the menu.
Adjust the diopter so that the AF
target mark is clearly visible.
Select in the mode menu and
adjust the brightness.
Block the sunlight with your
hand or use the viewfinder.
Bright light, such as direct
sunlight, may cause vertical
lines to appear on the image.
This is not a malfunction.
Set the mode dial to before
pressing the power switch to
turn the camera on.
Press twice quickly, or set
the mode dial to .
“NO PICTURE” appears on the
monitor. Record pictures.
Refer to “Error codes”.
The monitor does not function
when the video cable is
connected to the camera.
P. 56
P. 117
P. 117
P. 31
P. 115
P. 31
—
P. 45
P. 56
P. 133
P. 133
P. 104