Filter
Top Products
13
En
Loading the battery
1 Make sure that the camera's power
switch is set to OFF.
2 Slide the battery compartment lock
to ) and open the battery
compartment cover.
3 Load the battery as shown in the
illustration.
4 Slide the battery compartment lock
to = .
Unloading the battery
• Make sure the power switch is set to
OFF and the card access lamp is not
blinking.
• Slide the battery compartment lock and
remove the battery.
• If the battery compartment cover
comes off, fit the hinges back together
to re-attach the cover to the camera.
Power switch
Battery compartment lock
Battery
compartment
cover
Direction indicating mark
Battery
compartment lock
s0004_oe_Basic.book Page 13 Friday, September 16, 2005 6:51 PM