Filter
Top Products
135
11
Connecting the camera to a computer
Connecting the camera to a computer
Connect the cradle to the computer using the USB cable, and set the
camera in the cradle.
1 Make sure the camera is turned
off.
• The power lamp is off.
• The monitor is off.
• The lens barrier is closed.
2 Plug the USB cable into the USB port on the computer.
• Refer to your computer’s instruction manual to locate the position of the
USB port.
3 Plug the USB cable into the
cradle’s USB connector.
4 Set the camera in the cradle.
• The camera turns on automatically.
• The monitor turns on and the selection
screen for the USB connection is
displayed.
5 Select [PC], and press Z.
6 The camera is recognized by the
computer.
• Windows 98SE/Me/2000
When you connect the camera to your
computer for the first time, the
computer attempts to recognize the
camera. Click “OK” to exit the message
that is displayed. The camera is recognized as a “Removable Disk”.
Monitor
USB connector
PC / PRINTER
GO
SELECT
PC
PRINT ORDER
SEL. PRINT
EXIT