Filter
Top Products
145
12
Appendix
Troubleshooting
Error messages
Monitor indication Possible cause Corrective action
q
CARD ERROR
There is a problem with
the card.
This card cannot be used. Insert a
new card.
q
WRITE-
PROTECT
Writing to the card is
prohibited.
The recorded image has been
protected (read-only) on a
computer. Download the image to a
computer and cancel the read-only
setting.
>
MEMORY FULL
The internal memory
has no available
memory and cannot
store any new data.
Back up all data to a card or erase
unwanted data. Before erasing,
download important data to a
computer.
q
CARD FULL
The card has no
available memory and
cannot store any new
data.
Replace the card or erase unwanted
data. Before erasing, download
important data to a computer.
L
NO PICTURE
There are no pictures in
the internal memory or
on the card.
The internal memory or the card
contains no pictures.
Record pictures.
r
PICTURE
ERROR
There is a problem with
the selected picture and
it cannot be played back
on this camera.
Use image processing software to
view the picture on a computer. If
that cannot be done, the image file
is damaged.
CARD-COVER
OPEN
The battery
compartment/card
cover is open.
Close the battery compartment/card
cover.
Y/M/D
When the camera is
used for the first time or
the battery has been
removed for a long time,
the date and time are on
the factory default
setting.
Set the date and time.
This card cannot be
used with this camera
or the card is not
formatted.
• Replace or format the card.
• Select [POWER OFF] and press
i. Insert a new card.
• Select [FORMAT] and press i.
All data on the card is erased.
FORMAT
CARD SETUP
POWER OFF
GO
SELECT