Olympus IR-300 Digital Camera User Manual


 
154
12
Appendix
AC adapter
An AC adapter is useful for time-consuming tasks such as image
downloads to a computer.
Use the supplied Olympus AC adapter (A511) to power your digital
camera from a common AC wall outlet. Do not use any other AC adapter
with this camera.
TIPS
When the AC adapter is connected, pressing the POWER switch turns the
camera on in playback mode regardless of the position of the mode switch.
If you use the AC adapter when the camera is turned on, the battery in the
camera will be charged.
The battery charges in approximately 2 hours.
The power lamp slowly flashes while the battery is charging.
When the cradle is docked with a Dock&Done storage unit (hard disk or DVD),
the camera is charged via the unit. Turn the camera off.
Note
If the battery power runs out while the camera is connected to a computer or
printer, the image data may be lost or damaged. It is recommended that you
use the supplied AC adapter when connecting the camera to a computer or
printer. Do not connect or disconnect the AC adapter while the camera is
connected to a computer or printer.
Do not remove or load the battery or connect or disconnect the AC adapter
while the camera is turned on. Doing so could affect the camera’s internal
settings or functions.
If an error occurs while the battery in the camera is charging, the power lamp
lights red. Check that the battery and plug are inserted correctly.
DC-IN jack
AC wall outlet
Power cable
AC adapter (A511)
Connection
cord plug