Olympus IR-300 Digital Camera User Manual


 
35
3
Basic shooting functions
Using the zoom when taking pictures
(Zoom/Macro)
You can zoom in on your subject using the optical zoom and digital zoom.
With the optical zoom, the image is enlarged for the CCD when the lens
magnification is changed, and the image is formed by all the CCD pixels.
With the digital zoom, the area at the center of the image captured by the
CCD is cropped and enlarged. When you digitally zoom in on a subject,
you are essentially taking a small area of the picture and making it bigger.
Therefore, the greater the magnification with the digital zoom, the grainier
the resulting picture will be.
The following zoom magnifications are available on this camera.
Optical zoom 3× (equivalent to 38 mm to 114 mm on a 35 mm
camera)
Optical zoom + digital zoom Max. 12×
Note that camera movement is amplified at higher magnifications.
1 Push or pull the zoom lever.
Using the zoom
Note
You can use the optical zoom in n mode by setting [R] to [OFF].
g“Recording sound with movies” (P. 42)
Zoom lever
Zoom out:
Push the zoom lever toward W.
Zoom in:
Pull the zoom lever toward T.