Filter
Top Products
45
4
Additional shooting functions
Adjusting picture brightness
This function allows you to make fine changes to the exposure setting. You
can adjust the exposure in the range of ±2.0 EV in 1/2 EV steps. When the
setting is changed, you can check the result on the monitor.
Top menu [MODE MENU] [F] g“Using the menus” (P. 18)
1 Press [\ to adjust the
exposure, and press i.
• Adjust toward [+] to brighten the image
or [–] to darken the image.
2 Take the picture.
TIPS
• Often bright subjects (such as snow) will turn out darker than their natural
colors. Adjusting toward [+] makes these subjects closer to their real shades.
To prevent the picture from getting brighter, adjust toward [–] when shooting
dark subjects.
• In some situations, you may get better results when the exposure that the
camera sets is compensated (adjusted) manually.
Note
• If the flash is used, the image brightness (exposure) may differ from the
intended brightness.
• Exposure compensation cannot correct the image if the surroundings of the
subject are extremely bright or dark.
F
0.0
0.0
GO
CANCEL
SELECT