Filter
Top Products
52
4
Additional shooting functions
Changing picture brightness
(EXP. COMP.)
In some situations, you may get better results when the exposure that the
camera sets is compensated (adjusted) manually. You can adjust the
exposure in the range of ±2.0 EV in 1/3 EV steps. When the exposure is
changed, you can check the result on the monitor.
Top menu [EXP. COMP.] g“Using the menus” (P. 19)
1 Press ON to adjust the
exposure, and press Z.
• Adjust toward [+] to brighten the image
or [–] to darken the image.
2 Take the picture.
TIPS
• Often, bright subjects (such as snow) turn out darker than their natural colors.
Adjust toward [+] to make these subjects closer to their real shades. To prevent
the picture from getting brighter, adjust toward [–] when shooting dark subjects.
Note
• Sometimes, using the flash may not produce the brightness (exposure) that
was intended.
• The effects of exposure compensation may be limited when the surroundings
of the subject are extremely bright or dark.
E
-1.0
SELECT
OK
GO